plasti dip atv plastics

TX4PLAY · 04-21-2009, 11:26 PM

Quote:

Originally Posted by BigP

**** yeah. all that lift and those tires and no snorkels? bout time!

by the way.. youre gonna need more than 1 miller lite to complete this jawb =)

I've been flirtin' with disaster for some time now, figured it was about time I got some insurance.

and they's plenty mo burrs were dat one come from!

Mall Crawler · 04-22-2009, 07:47 AM

Well it has been a few days in the making but I have managed to cross everything off my list except finding another rear knuckle, installing the other rear axle and changing out the spark plug boot. It kinda stinks when you spend so much money and it still looks the same. lol

Big Bad Brute · 04-22-2009, 02:09 PM

i changed all the fluids and stripped the front diff bolt for the 100000000 time. Time to replace it with something else.

rebelbowtie · 04-25-2009, 10:38 PM

cleaned 5lbs of dirt out of the CVT case.....

phreebsd · 04-25-2009, 11:02 PM

changed the front diff oil today

FABMAN · 04-27-2009, 01:03 AM

I built a rack for my seat to sit level. Its not done yet but close. I going to put foot rests on for my 4 year old so he can hang on better. Ill pant it like the stock racks when done.

Oh yah welding conduit bites!!

Yesterday · 04-27-2009, 05:24 AM

sweet. i wish i could weld betta

Brian31 · 05-01-2009, 04:53 PM

I shortened the winch wires and switched to Amsoil

DrillersGoDeeper · 05-01-2009, 08:58 PM

Putting 05 springs on and fresh powdercoat on springs, rear brackets on lift, and racks. Gonna look even better!

kawa650 · 05-01-2009, 10:39 PM

im changing a CV outer boot on the right front axle (which is only a few months old ("sticks")) and new brake pads

Muddy Brute Force · 05-01-2009, 10:45 PM

I fixed the free spool problem on my Viper Max 3000. Works fine now.

phreebsd · 05-01-2009, 11:50 PM

^ what was wrong? clean and regrease?

FABMAN · 05-02-2009, 12:39 AM

Made taller snorks for mine & cleaned the air filter.

Muddy Brute Force · 05-02-2009, 12:53 AM

quote: ^ what was wrong? clean and regrease?

No, the metal star peice in the free spool knob had vibrated and seated itself lower in the engauge position and had created a lip stopping the star from sliding properly and wouldn't allow the free spool knob to turn. I talked with Kent at Moto Alliance and he said to take a dremal tool and smooth the ridge out, and that allowed the free spool knob to turn so that the free spool would work again.

rhettag94 · 05-02-2009, 04:56 PM

Finishing rad mod and getting some more vent hoses. Tommorrow too much too list.

kacey1 · 05-02-2009, 05:34 PM

NEW Warn Wireless Remote Control System clean air filter oil change fixed snorkels aluminum tape on my under fender by the mufler the old shat fell off . and fiberglassed my frunt fender it looked like work ok it had a big crack in it

phreebsd · 05-02-2009, 06:26 PM

i affixed two new black mimb stickers on my front fenders. I went black this time. keeping the theme going. im tempted to paint the radiator black as well.

bayou_boy_22 · 05-02-2009, 09:59 PM

Like the black on green theme. The radiator kind of looks out of place though.

phreebsd · 05-02-2009, 10:08 PM

that's why im thinking of painting it black also.
what you think?
Ive seen some painted. wonder if it lessens the cooling ability?

Yesterday · 05-02-2009, 10:14 PM

What have i done for my quad today?

gave it a lil taste of hel|

04-22-2009, 07:47 AM	#22
Mall Crawler Gettin Muddy Join Date: Jan 2009 Location: Hattiesburg, MS	Well it has been a few days in the making but I have managed to cross everything off my list except finding another rear knuckle, installing the other rear axle and changing out the spark plug boot. It kinda stinks when you spend so much money and it still looks the same. lol
	__________________________ 2006 Honda Foreman S
Feedback: (1)

04-22-2009, 02:09 PM	#23
Big Bad Brute Newbie Join Date: Apr 2009	i changed all the fluids and stripped the front diff bolt for the 100000000 time. Time to replace it with something else.
Big Bad Brute Newbie Join Date: Apr 2009
Feedback: (0)

04-25-2009, 10:38 PM	#24
rebelbowtie Newbie Join Date: Apr 2009	cleaned 5lbs of dirt out of the CVT case.....
rebelbowtie Newbie Join Date: Apr 2009
Feedback: (0)

04-25-2009, 11:02 PM	#25
phreebsd Wright Guard Join Date: Dec 2004 Location: Bama Images: 37	changed the front diff oil today
	__________________________ 2008 Kawasaki Teryx 31" Laws Black ITP SS212's Relocated Radiator Maroon Primary Yellow Secondary MIMB Snorkels (dual 2" intake) Rejetted RaceDriven Sintered Metal Brake Pads BigGun EVO Exhaust Viper Max 5000 WideSpool with Amsteel Blue TEAM ROLLIN' DEEP 2013 2011 Yamaha WR250R
Feedback: (7)

04-27-2009, 01:03 AM	#26
FABMAN Honored Member Join Date: Dec 2008 Location: St Francis MN Images: 92	I built a rack for my seat to sit level. Its not done yet but close. I going to put foot rests on for my 4 year old so he can hang on better. Ill pant it like the stock racks when done. *Oh yah welding conduit bites!!*
	__________________________ THERE IS NO REPLACEMENT FOR DISPLACEMENT 07 BRUTE FORCE 840i FST 3" MANDRAL BENT SNORKEL, BIG GUN FULL EXH, JETED 170 F 175 R, Dyna fully programmable cdi, Dyna coils & 6* key, VFJ stage 3 spider mod Clutch, CUSTOM FULL SKID"S by me, CUSTOM REAR BUMPER by me, CUSTOM reinforced stock rims by me, 3000 LPS WINCH SYNTHETIC ROPE, 4' plow. Fabstress . 06 Polaris Outlaw 500 Big Bore JETED Fabjr my 7 YEAR OLD. 06 Apex 90 cc pro shark, KTM jr 50
Feedback: (0)

jacked up four wheelers

jacked up with lift kit polaris four wheeler

mud moving in the viper 101

pink plasti dip atv

plasti dip atv plastics

plasti dip camo

plasti dip can am outlander

plasti dip four wheeler

plasti dip on atv

plasti dip quad

04-27-2009, 05:24 AM	#27
Yesterday Professional Mudder Join Date: Jan 2009 Location: Central Arkansas Images: 15	sweet. i wish i could weld betta

Feedback: (0)

05-01-2009, 04:53 PM	#28
Brian31 Newbie Join Date: Apr 2009 Location: Illinois	I shortened the winch wires and switched to Amsoil
Brian31 Newbie Join Date: Apr 2009 Location: Illinois	__________________________ 2008 Grizzly 700
Feedback: (0)

05-01-2009, 08:58 PM	#29
DrillersGoDeeper SAY I WON'T!!! Join Date: Jan 2009 Location: Jonesboro, LA	Putting 05 springs on and fresh powdercoat on springs, rear brackets on lift, and racks. Gonna look even better!
	__________________________ *Dale Golden* *SUPPORT OUR TROOPS* *2009 CAN AM 800R OUTTYMAX* *SS212/28" SILVERBACKS* *MUD INDUSTRIES SNORKELS* *RUBBERDOWN CUSTOM POW/MIA RAD RELOCATE* *2012 Can Am Commander 1000 XT* *29.5 HL Outlaw2's* *CVTech Primary & machined secondary* *Bad Dawg Roof/BRP half windshield* *Rigid 10" SR LED light bar* *Yeti Cooler for the Cold Beers!*
Feedback: (0)

05-01-2009, 10:39 PM	#30
kawa650 Lets Get It Join Date: Dec 2008 Location: West Columbia, Texas	im changing a CV outer boot on the right front axle (which is only a few months old ("sticks")) and new brake pads
	__________________________ O7 Brute Force 650i with some goodies
Feedback: (0)

05-01-2009, 10:45 PM	#31
Muddy Brute Force Rollin' Deep Join Date: Dec 2008 Location: Raeford NC Images: 14	I fixed the free spool problem on my Viper Max 3000. Works fine now.
	__________________________ *2008 Kawasaki Brute Force 650 SRA* *28" Zilla's on ITP SS 106 Wheels* *Viper Max 3000 lb winch w/ Amsteal rope* *K&N w/ Prefilter,* *Dynatek CDI,* *Full Muzzy* *Jetted 145F 148R, Polished Slides,* *Bison Bumpers, Split* *Audio Tube,* *MIMB Center 2" Snorkeles, Catch Can Mod.,Tempature gauge* V-Force John Stage 2 Clutch Mod w/EPI Stock primary/Black secondary, Radiator Relocate Intake Crossover Mod**
Feedback: (0)

05-01-2009, 11:50 PM	#32
phreebsd Wright Guard Join Date: Dec 2004 Location: Bama Images: 37	^ what was wrong? clean and regrease?
	__________________________ 2008 Kawasaki Teryx 31" Laws Black ITP SS212's Relocated Radiator Maroon Primary Yellow Secondary MIMB Snorkels (dual 2" intake) Rejetted RaceDriven Sintered Metal Brake Pads BigGun EVO Exhaust Viper Max 5000 WideSpool with Amsteel Blue TEAM ROLLIN' DEEP 2013 2011 Yamaha WR250R
Feedback: (7)

05-02-2009, 12:39 AM	#33
FABMAN Honored Member Join Date: Dec 2008 Location: St Francis MN Images: 92	Made taller snorks for mine & cleaned the air filter.
	__________________________ THERE IS NO REPLACEMENT FOR DISPLACEMENT 07 BRUTE FORCE 840i FST 3" MANDRAL BENT SNORKEL, BIG GUN FULL EXH, JETED 170 F 175 R, Dyna fully programmable cdi, Dyna coils & 6* key, VFJ stage 3 spider mod Clutch, CUSTOM FULL SKID"S by me, CUSTOM REAR BUMPER by me, CUSTOM reinforced stock rims by me, 3000 LPS WINCH SYNTHETIC ROPE, 4' plow. Fabstress . 06 Polaris Outlaw 500 Big Bore JETED Fabjr my 7 YEAR OLD. 06 Apex 90 cc pro shark, KTM jr 50
Feedback: (0)

05-02-2009, 12:53 AM	#34
Muddy Brute Force Rollin' Deep Join Date: Dec 2008 Location: Raeford NC Images: 14	quote: ^ what was wrong? clean and regrease? No, the metal star peice in the free spool knob had vibrated and seated itself lower in the engauge position and had created a lip stopping the star from sliding properly and wouldn't allow the free spool knob to turn. I talked with Kent at Moto Alliance and he said to take a dremal tool and smooth the ridge out, and that allowed the free spool knob to turn so that the free spool would work again. Last edited by Muddy Brute Force; 05-02-2009 at 12:55 AM.
	__________________________ *2008 Kawasaki Brute Force 650 SRA* *28" Zilla's on ITP SS 106 Wheels* *Viper Max 3000 lb winch w/ Amsteal rope* *K&N w/ Prefilter,* *Dynatek CDI,* *Full Muzzy* *Jetted 145F 148R, Polished Slides,* *Bison Bumpers, Split* *Audio Tube,* *MIMB Center 2" Snorkeles, Catch Can Mod.,Tempature gauge* V-Force John Stage 2 Clutch Mod w/EPI Stock primary/Black secondary, Radiator Relocate Intake Crossover Mod**
Feedback: (0)

05-02-2009, 04:56 PM	#35
rhettag94 Newbie Join Date: Apr 2009 Location: Tyler, TX Images: 4	Finishing rad mod and getting some more vent hoses. Tommorrow too much too list.
	__________________________ 2007 BRUTE 650I CAMO 14 IN SS 108 BLACK 27 ITP XTR MUDLITES, MIMB SNORKELS 1 1/2 HL WHEEL SPACERS, H/L SPINGS AND 2 INCH LIFT, PENLOCK, CRANK CASE MOD MAROON PRIMARY ALMOND SECONDARY, MOOSE POWER MODULE, FUEL CELL CARRIER MOD UNI FILTER OUTERWEAR PRE FILTER MIMB EXHAUST MOD, RAD RELOCATE 2007 HONDA RINCON ONE HOT LADY
Feedback: (0)

05-02-2009, 05:34 PM	#36
kacey1 Gettin Muddy Join Date: Feb 2009 Location: canada bc	NEW Warn Wireless Remote Control System clean air filter oil change fixed snorkels aluminum tape on my under fender by the mufler the old shat fell off . and fiberglassed my frunt fender it looked like work ok it had a big crack in it YouTube - WARN Wireless Control Last edited by kacey1; 05-02-2009 at 05:46 PM.
	__________________________ 09 brute force 750 camo 27 inch Swamp-Lites ITP Rims SS212 M.I.M.B Snorkel M.I.M.B Temp Gauge M.I.M.B Catch Can M.I.M.B stock exhaust mod M.I.M.B Fan Switch
Feedback: (0)

05-02-2009, 09:59 PM	#38
bayou_boy_22 Kajun Mud Slingers Join Date: Mar 2009 Location: Houma, La	Like the black on green theme. The radiator kind of looks out of place though.
	__________________________ 07 Brute Force 750I NRA Edition 30" Zilla's on 14" ITP SS 312 Wheels, 2" Lift, Custom Audio Tube,MIMB Snorkels and Temp Gauge Gorilla Radiator Relocation Kit Fan on Switch, Radiator Painted Orange Almond Primary / Green Secondary Spring Viper Max 4000lb with Amsteel Blue Replaced Fan Breaker with Blade Fuse Dynatek CDI Blue LED's in Heads UP Display Blue LED Markers 8000K HID's 06 Brute Force 650I Custom Blue 28" Zilla's on 14" ITP SS 212 Wheels,Almond Secondary, 2500 Warn. 07 Polaris Sportsman 90 with 8000k HID's and some other goodies 01 Honda Recon 25" Mudlights 06 Arctic Cat 650 V-Twin (Work in porgress)
Feedback: (3)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
does your quad need to be moving to go into 4x4???	smokin_6.0	Kawasaki	31	12-07-2009 04:20 PM
zuki king quad	Wolfeee	Suzuki	5	10-21-2009 05:19 PM
rental quad!!!!!!!!!!!	smokin_6.0	ATV Media	4	06-28-2009 07:28 PM
Who needs a quad!!!	hondarecoveryman	ATV Media	12	05-25-2009 02:24 PM
crashed my quad	kacey1	Mud Pit	12	05-05-2009 08:52 PM

05-02-2009, 06:26 PM	#37
phreebsd Wright Guard Join Date: Dec 2004 Location: Bama Images: 37	i affixed two new black mimb stickers on my front fenders. I went black this time. keeping the theme going. im tempted to paint the radiator black as well.
	__________________________ 2008 Kawasaki Teryx 31" Laws Black ITP SS212's Relocated Radiator Maroon Primary Yellow Secondary MIMB Snorkels (dual 2" intake) Rejetted RaceDriven Sintered Metal Brake Pads BigGun EVO Exhaust Viper Max 5000 WideSpool with Amsteel Blue TEAM ROLLIN' DEEP 2013 2011 Yamaha WR250R
Feedback: (7)

05-02-2009, 10:08 PM	#39
phreebsd Wright Guard Join Date: Dec 2004 Location: Bama Images: 37	that's why im thinking of painting it black also. what you think? Ive seen some painted. wonder if it lessens the cooling ability?
	__________________________ 2008 Kawasaki Teryx 31" Laws Black ITP SS212's Relocated Radiator Maroon Primary Yellow Secondary MIMB Snorkels (dual 2" intake) Rejetted RaceDriven Sintered Metal Brake Pads BigGun EVO Exhaust Viper Max 5000 WideSpool with Amsteel Blue TEAM ROLLIN' DEEP 2013 2011 Yamaha WR250R
Feedback: (7)

05-02-2009, 10:14 PM	#40
Yesterday Professional Mudder Join Date: Jan 2009 Location: Central Arkansas Images: 15	What have i done for my quad today? gave it a lil taste of hel\|

Feedback: (0)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode