|
|
|
|||||||
| Register | Chat | Gallery | FAQ | Members List | Calendar | Arcade | Manuals & Maps | Search | Today's Posts | Mark Forums Read | MIMB Mobile |
 |
|
|
LinkBack | Thread Tools | Display Modes |
02-26-2012, 08:59 PM
|
#1 |
|
Trail Rider
|
cant get disc to fit between new brake pads
got my new race driven severe duty pads in sat...tonight i took my old pads off and compressed the piston all the way in...the disc will not fit in between the two pads...now the pads said they are for 08-09 but i asked the company if they would fit my 2011 and they said yes...so im not sure why its not going back together like supossed to be...im thinking the pads may be to thick or the disc is thicker than the older year kings...has anyone else ever had this problem...should i try and sand them down to get them to fit or just send them back and have them send me two new sets.
|
|
__________________________ 2011 KQ750 AXI 2" Highlifter Lift Kit, Highlifter Lift Springs, Gorilla Axles, Fully Skid Platted, 29.5 OL2s, 14" Motosport Diesels, 1.5" spacers, Uni Filter, 4500 lb Viper Winch, WildBoar Rad Relocator Kit, Epi Mudder Clutch Kit, 1.5" Shim, PowerCommander V, HMF Xl Swamp Series Exhuast, Fully Snorkeled, Custom Front n Rear Bumpers, Xenon 55Watt 5000k HIDs, 50" Warn Snow Plow for winter $$ makn |
|
Feedback: (0) |
|
|
02-27-2012, 08:22 AM
|
#2 |
|
Forum Admin.
 
|
if you have time and dont plan on riding soon and dont need it for work, id just see about swaping them out. if you are riding soon then yeah you could probably just sand them down a touch. just make sure you do it evenly.
|
|
__________________________ MIMB - The REAL "Brute Central"
www.MudInMyBlood.com We Have a Thread for That... 
|
|
|
Feedback: (4) |
|
|
02-27-2012, 04:28 PM
|
#3 |
|
Trail Rider
|
yeah im prob gonna have to sand them down a bit since i do have an event im going to this sat...ill def make sure to keep em even..thanks for the imput!
|
|
__________________________ 2011 KQ750 AXI 2" Highlifter Lift Kit, Highlifter Lift Springs, Gorilla Axles, Fully Skid Platted, 29.5 OL2s, 14" Motosport Diesels, 1.5" spacers, Uni Filter, 4500 lb Viper Winch, WildBoar Rad Relocator Kit, Epi Mudder Clutch Kit, 1.5" Shim, PowerCommander V, HMF Xl Swamp Series Exhuast, Fully Snorkeled, Custom Front n Rear Bumpers, Xenon 55Watt 5000k HIDs, 50" Warn Snow Plow for winter $$ makn |
|
|
Feedback: (0) |
|
|
02-27-2012, 07:43 PM
|
#4 |
|
Trail Rider
|
well i finally got my pads on...now i can go mudding this weekend still
 ...had to use my 3" belt sander with a 50 gritt belt to get them a little thinner...worked pretty well
|
|
__________________________ 2011 KQ750 AXI 2" Highlifter Lift Kit, Highlifter Lift Springs, Gorilla Axles, Fully Skid Platted, 29.5 OL2s, 14" Motosport Diesels, 1.5" spacers, Uni Filter, 4500 lb Viper Winch, WildBoar Rad Relocator Kit, Epi Mudder Clutch Kit, 1.5" Shim, PowerCommander V, HMF Xl Swamp Series Exhuast, Fully Snorkeled, Custom Front n Rear Bumpers, Xenon 55Watt 5000k HIDs, 50" Warn Snow Plow for winter $$ makn |
|
|
Feedback: (0) |
|
|
02-28-2012, 07:36 AM
|
#5 |
|
Forum Admin.
|
lol... glad you got them on
|
|
__________________________ MIMB - The REAL "Brute Central"
www.MudInMyBlood.com We Have a Thread for That...
|
|
|
Feedback: (4) |
|
|
02-28-2012, 06:25 PM
|
#6 |
|
Trail Rider
Join Date: Feb 2009
Location: Ohio
 |
Did you by chance not press the piston back in on the caliper?
|
|
__________________________ 2013 Polaris RZR 800 S EMP roof EMP cv guards front/rear windshield My own custom stereo, 4 JL 8s, Fosgate amp, Kenwood head unit Rear cage extension soooo much more to come |
|
|
Feedback: (2) |
|
|
02-28-2012, 06:34 PM
|
#7 | |
|
Forum Admin.
|
he said he pushed it all the way in: ??
Quote:
|
|
|
__________________________ MIMB - The REAL "Brute Central"
www.MudInMyBlood.com We Have a Thread for That...
|
||
|
Feedback: (4) |
|
|
04-12-2012, 10:14 AM
|
#8 |
|
Gettin Muddy
Join Date: Nov 2010
Location: Prince George B.C. Canada
|
You know alot of these smaller brakepads still contain asbestos. There was never a law passed banning it's use. It was phased out voluntarily by the auto manufacturers. There are even some auto companys that are still using asbestos in there brake linings, (Hyundai and Kia).
Somthing to keep in mind before anybody else sands down a set of brakepads, protect yourself. |
|
Feedback: (1) |
|
|
04-12-2012, 11:44 AM
|
#9 |
|
Rollin' Deep
 
Join Date: Aug 2011
Location: Hammond, LA
|
Hmmm i couldve sworn it was banned
|
|
__________________________  2011 Honda Rancher FPM 29.5" Skinny Outlaws 12" Itp SS312s MIMB Dual Snorkels UNI air filter Boss 6.5" Marine Audiotube w/ Tweeters 35% Primary Gear Reduction EPI Mudder Series Clutch Kit 3" Stretch comming soon!! |
|
|
Feedback: (0) |
|
|
04-12-2012, 04:04 PM
|
#10 |
|
Gettin Muddy
Join Date: Nov 2010
Location: Prince George B.C. Canada
|
It was banned for use in building supplies like drywall mud. But even then they can still use it in concrete formed ductwork if local building code allows it.
The North American auto manufacturers voluntarily quit using asbestos when the health risks became known. As far as smaller stuff I have seen a set of brake pads for a snowmobile that contained asbestos in the last five years. |
|
Feedback: (1) |
|
|
04-12-2012, 05:29 PM
|
#11 |
|
Rollin' Deep
Join Date: Aug 2011
Location: Hammond, LA
|
Hmmm learn something new everyday i guess. Lol
|
|
__________________________ 2011 Honda Rancher FPM 29.5" Skinny Outlaws 12" Itp SS312s MIMB Dual Snorkels UNI air filter Boss 6.5" Marine Audiotube w/ Tweeters 35% Primary Gear Reduction EPI Mudder Series Clutch Kit 3" Stretch comming soon!! |
|
|
Feedback: (0) |
|
|
04-13-2012, 08:52 PM
|
#12 |
|
Trail Rider
|
didnt know they could have asbestos in them...glad im still alive n healthy other than being a fat boy...next time ill make sure and use my mask...thanx for the info bro!
|
|
__________________________ 2011 KQ750 AXI 2" Highlifter Lift Kit, Highlifter Lift Springs, Gorilla Axles, Fully Skid Platted, 29.5 OL2s, 14" Motosport Diesels, 1.5" spacers, Uni Filter, 4500 lb Viper Winch, WildBoar Rad Relocator Kit, Epi Mudder Clutch Kit, 1.5" Shim, PowerCommander V, HMF Xl Swamp Series Exhuast, Fully Snorkeled, Custom Front n Rear Bumpers, Xenon 55Watt 5000k HIDs, 50" Warn Snow Plow for winter $$ makn |
|
|
Feedback: (0) |
|
|
04-13-2012, 09:31 PM
|
#14 |
|
Trail Rider
|
very true
|
|
__________________________ 2011 KQ750 AXI 2" Highlifter Lift Kit, Highlifter Lift Springs, Gorilla Axles, Fully Skid Platted, 29.5 OL2s, 14" Motosport Diesels, 1.5" spacers, Uni Filter, 4500 lb Viper Winch, WildBoar Rad Relocator Kit, Epi Mudder Clutch Kit, 1.5" Shim, PowerCommander V, HMF Xl Swamp Series Exhuast, Fully Snorkeled, Custom Front n Rear Bumpers, Xenon 55Watt 5000k HIDs, 50" Warn Snow Plow for winter $$ makn |
|
|
Feedback: (0) |
|
|
| Bookmarks |
| Search tags for this page |
can i sand down brake pads,can you sand down brake pads,cant fit new brake pads,cant get brake pads over disc,cant get disc in between brake pads,had to sand down rear pads to get them to fit,how to get disc between brakes,race-driven polaris rzr brakes,sanding down brake pads,what should you do to new brake pads on snowmobile
Click on a term to search for related topics.
|
| Thread Tools | |
| Display Modes | |
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| The BEST front brake pads | myersr15 | General Tech. & Audio Info. | 20 | 10-03-2012 05:09 AM |
| Foreman disc brake conversion | AUbruterider | Honda | 7 | 10-10-2011 01:17 PM |
| Home Made Brake Pads | whoolieshop | How-To's | 15 | 08-27-2011 07:15 PM |
| brake pads | 05fcpbrute | Kawasaki | 4 | 03-04-2010 07:05 PM |
| EBC brake pads | chrish051873 | Mud Pit | 7 | 02-24-2010 06:32 AM |
Linear Mode
