belt housing cover!! need help - MudInMyBlood Forums
User Tag List

 
LinkBack Thread Tools Display Modes
post #1 of 6 Old 06-29-2014, 02:03 AM Thread Starter
Newbie
 
MonsterOutty1000's Avatar
 
Join Date: Aug 2013
Posts: 26
 
belt housing cover!! need help

It have a outty and I have 2 bolt that hold the belt housing cover on stuck they will just spin and won't come out can any1 tell me how I can get them off without breaking the cover?
MonsterOutty1000 is offline  
Sponsored Links
Advertisement
 
post #2 of 6 Old 06-29-2014, 07:32 AM
Gettin Muddy
 
chopermech's Avatar
 
Join Date: Dec 2012
Posts: 151
 
Sadly, you will have to get a drill and adapt it to your socket, spin in high, then melt the nut out. Takes about :30 seconds. You will need a new back cover. Use anti-seeze and 10% less torque on the new bolts.


Sent from my iPhone using Tapatalk

---------- Post added at 08:32 AM ---------- Previous post was at 08:32 AM ----------

Its a crap design


Sent from my iPhone using Tapatalk
chopermech is offline  
post #3 of 6 Old 06-29-2014, 02:48 PM
Moderator
 
NMKawierider's Avatar
 
Join Date: Apr 2009
Location: NM
Posts: 7,274
           
Like Chopermech says, it will take outward pull or force while turning it in hopes it will catch some threads. Applying that pressure with a screwdriver between the lip near the bolt head will do that but the cover won't take that for long. Plan on replacing it if it doesn't start out very soon. I have not seen how C/A holds their covers on so maybe a photo or two may help generate more ideas.

06 BF 750 (Silver) SOLD
15 Z Force 800 EPS


My Videos on You Tube
NMKawierider is online now  
Sponsored Links
Advertisement
 
post #4 of 6 Old 06-30-2014, 06:40 AM
Gettin Muddy
 
chopermech's Avatar
 
Join Date: Dec 2012
Posts: 151
 
belt housing cover!! need help

I just did this job on an '11 outlander. They have brass splined inserts in the back cover that strip super easy. If any dirt or corrosion gets on the bolt, forget it. You will be pulling clutches and replacing the back plate. Anti-seeze and torque to spec with about a 10% reduction due to lubricated threads. That's the first thing I would do off the dealer floor.


Sent from my iPhone using Tapatalk
chopermech is offline  
post #5 of 6 Old 06-30-2014, 10:16 AM
Moderator
 
NMKawierider's Avatar
 
Join Date: Apr 2009
Location: NM
Posts: 7,274
           
Quote:
Originally Posted by chopermech View Post
I just did this job on an '11 outlander. They have brass splined inserts in the back cover that strip super easy. If any dirt or corrosion gets on the bolt, forget it. You will be pulling clutches and replacing the back plate. Anti-seeze and torque to spec with about a 10% reduction due to lubricated threads. That's the first thing I would do off the dealer floor.


Sent from my iPhone using Tapatalk
Well that sounds like a sorry design...

06 BF 750 (Silver) SOLD
15 Z Force 800 EPS


My Videos on You Tube
NMKawierider is online now  
post #6 of 6 Old 06-30-2014, 01:43 PM
Gettin Muddy
 
chopermech's Avatar
 
Join Date: Dec 2012
Posts: 151
 
Indeed it is. Ain't no quad giving you the quality you think you are getting. Short cuts are always made, even if you didn't at the pocket book


Sent from my iPhone using Tapatalk
chopermech is offline  
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the MudInMyBlood Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
squealing from belt housing from exhaust snorkel jstuart83 Kawasaki 7 06-03-2012 12:28 PM
Need Belt cover. Stimpy Want to Buy 3 04-02-2012 12:18 AM
Loud ping noise from belt housing ????? bayou_boy_22 Kawasaki 4 01-09-2011 06:48 PM
Belt/CVT cover MeanGreen198 Kawasaki 5 09-13-2009 08:24 PM
$%# belt housing bolts breaking off !!! TEXAN AVIATOR Kawasaki 13 04-21-2009 09:42 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome