I read on the 2010 850XP they repositioned the sway bar vs 2009's allowing for larger than normal tires to fit on the stock wheels. However looking at my 2010 with 26x11x14 Bighorns they are only 1" away from touching bar on left rear. 12" wide would be cutting it close if the bar moves toward tire at all.
Going taller should be ok but not sure if wider would work.
Can-AM Outlander 1000XT all stock for now
Polaris 2010 850XP EPS, LE crimson red, Bighorns, HID lights, F&R brush guards, load and ride box.
BF AMR 840 13.1-1, X4 Cams, Muzzy Pro, 39MM carbs. plus 1.5mm intake valves, plus 1 exhaust, full race port, JH machine clutch, programmable dynatek
Last edited by AMR840; 07-18-2010 at 07:44 AM.