|Topic Review (Newest First)|
|01-31-2019 07:43 AM|
Originally Posted by 12CamoBruteNasty View Post
|01-30-2019 08:49 PM|
I was planning on running Rotela T6. will that be a issue or not? Just bought thge bike with 1k miles. Its a 2012 120 hrs
|02-11-2015 09:11 PM|
|NMKawierider||I'm sure Amsoil has lots of propaganda and test results on their website. It almost toasted a very expensive LT1 of mine 37 years ago.. so I'll never trust it in anything ever again. But lots do and sware by it so..go for it. Personally, If I were to go synthetic, it would be Mobile-1, Royal Purple, Castrol or even a Valvoline. But most pre 2012 Brutes don't like synthetic...they burn it. Mine is one.|
|02-10-2015 06:55 AM|
I'm just curious, I have been lurking on this oil thread for a while now and read and read and read. Tried to find more info from diff websites like bobistheoilguy and not really finding the results.
Im looking for some test results of the amsoil and maybe some of the other synthetics in the brute force. By the poll it seems like Amsoil,Castrol,Manufactures brand, mobil and shell r is the most commonly used. Im guessing out of all of these Amsoil, and mobil 1 are the most common sythetics listed.
I was hoping to see a result of the sythetic vs conv. oil in a brute under normal conditions and see what to go with. Surely someone has had a sample sent off. Or is there a kit you can buy to test oil.
As of right now personally i have used the Kawi oil until my shop quit selling it so i have been using Honda oil. I run Amsoil in my R6 and like it enough i wouldnt mind runnin it in the brutus
|09-11-2014 04:12 PM|
|6.SLOW||Rotella, I always have some left over from my truck oil changes|
|03-14-2014 03:00 PM|
Originally Posted by Franny View Post
|03-14-2014 01:25 PM|
Thanks for advice and how often would you change oil during break in? Every 100 mi?
Sent by tapatalkaroo
|03-14-2014 12:52 PM|
Nmk is right. Your rings will never seal properly. Synthetic is so thin that it will slip past the rings and put a coating on on them
Sent from my iPhone using Tapatalk when I should be doing something more productive.
|03-14-2014 12:27 PM|
|NMKawierider||Never use synthetic for break-in. They just don't break in correctly. Some are argue that but it's just fact. After 500 miles or so, fine, use it.|
|03-10-2014 09:29 PM|
|Franny||I have a question slightly off subject but it has to do with the oil... I am getting a rebuilt motor back from Nflow shortly and wondering what you guys think is the best for break in? Same as my normal Mobil 1 synthetic|
|01-26-2014 07:38 AM|
Rotella 15w-40 or straight weight. Synthetic oil is too slick for the bottom end. They wont last. Synthetic oil is also too slick for the piston oil wiper ring, which is why the engine burns and consumes more.
Sent from my iPhone using Tapatalk
|01-25-2014 09:02 PM|
|wideawakejake||but when warrenty is up, i will switch to hellmart's oil. which is really everyones elses oil less the fancy packaging and advertising.|
|01-25-2014 07:51 PM|
|wideawakejake||kawi oil , wet brake, and filter. kawi sends me 20% off coupons every couple of months so i just use those to get the goods from my local kawi dealer.|
|01-25-2014 02:24 AM|
|Zmt919||Ok well here is my opinion! I been racing motocross for 14 years now and the past 6 years I had got on with a dealer that gives me my Ams Oil for FREE! And I run it in almost everything that I have that has a motor. And I love it, not just cause it was free but cause is was awesome! Plus racing as much as I did and all I was changing my oil every weekend and maybe twice on a weekend if it was a big event! Well this pass summer I bough me a 2010 brute 750. So since I got Ams Oil for free I ran it in my brute! But I will say as for as me I don't think I will run it in my brute no more. My motor is at DSC getting rebuild cause it was locked up! The worst dale has seen! But I did notice it did burn the oil bad! And my bike ran really hot!! The pipe would be glowing red!!! And I changed mines about every 15 to 20 hours. So as far as running Ams Oil I would say change it really often and check the leave throw riding and stuff like that! Hate to see another person have to rebuild a motor from the oil!!! But I'm wait and see what Dale thinks I should run! But if I do go back to Ams Oil looks like I'll be seeing my dealer even more cause I'll be changing it after ever ride and maybe twice on a big weekend ride!!!|
|01-22-2014 09:43 AM|
Originally Posted by FABMAN View Post
Shell Rotella ?
|This thread has more than 15 replies. Click here to review the whole thread.|