Mud in My Blood Forum banner

snorkel

  1. Idle under water solutions?

    Kawasaki
    Ok I have read everywhere that my brute is not the only one that doesn't idle underwater. I have a 2014 750i that I just snorkeled and although I have only tested them once (on a boat launch) it stalled as I was trying to change gears. Now I'm not wanting it to idle for long periods of time...
  2. 98 big bear snorkel...?

    Yamaha
    I'm about to do a snorkel on my 98 big bear I'm just looking for some ideas from people that's done it... Just curious how people have had it coming out of the air box.. Anyone have pics?? Or anything thanks
  3. Problems Snorkeling my 13' XMR 1000

    Can-Am/BRP
    So I have snorkeled my XMR with a kit from **************. The only issue i have found is my rubber boot was sitting to close to the motor or something and melted it where the clamp holds it down.. Has anyone had this kind of issue before? And does anyone have any Advise they could lend to help...
  4. Any brute force owners around Lexington, ky?

    Kawasaki
    Lookin for someone around Lexington, Ky to help me Snorkle my 05 750 brute.
  5. Aftermarket parts for 13' 1000 Xmr ?

    Can-Am/BRP
    My 2013 Can Am Outlander 1000 Xmr arrived today! I dont like the ISS on it though, and would like a little more lift. Is there any aftermarket parts out yet for my model?
  6. Prairie 300 Snorkel

    Kawasaki
    Here is one to pick your brains with.... My Son has a Prairie 300 (2002) he is getting braver when we go out and is starting to go deeper (a little too deep last weekend as we sat while his belt dried out) Well I am wanting to snorkel it now. The Airbox and intake on the cvt seems easy enough...
  7. I need the truth!

    Mud Pit
    :aargh4: Ok, got a new 2011 Brute 750i and cannot pull the trigger on building snorks (using MIMB) or any other brand for that matter. I think I've read way too many forums on the topic and it's clouded my judgement as everyone is saying something different. I talked to Highlifter and they tell...
  8. 2"/3" Center Snorkel Parts List 750 brute

    Kawasaki
    I have noticed their is no parts list for a snorkel of this kind, it is in the MIMB style have not put this together yet but will very soon and post the pics up after i do well here it goes. Intake 3" Thin wall drainage pipe comes in 10' sections 3" 90* street fitting make sure its the short...
  9. Glasspack or FO-14?? and other mod ?s

    Honda
    i've been doing alot of research for both of these and all is good, but i'm not sure what to go with, they are almost the same. i found a thrush glasspack with 1.75" inlet/outlet, 12"x3.5" body, 17" overall length. the FO-14 tractor muffler has a 2" inlet, not sure about outlet, aluminized. The...
  10. Ventlines

    Kawasaki
    Hey yall I'm jus wondering what u brute guys run ur ventlines to? I just snorkeled mine an I'm contemplating on where to run them. :thinking: Pics r greatly appreciated!
  11. How To Relocate Radiator on 2006 Praire 360 ??

    Kawasaki
    I need some info on how to relocate the stock radiator to the front rack and some bracket tips please help!
  12. 08 Brute Force 750 Stock Airbox/Snorkel Help?

    Want to Buy
    I'm looking for stock intake pieces for the airbox and belt case (intake/exhaust) that were taken off when doing the snorkel kit. I threw mine out but with all these snorkeled Brutes on here I thought I might find someone with a set laying around. Email me at [email protected] if you have a...
  13. Help with snorkels

    Kawasaki
    I did post this in general tech and then moved it here because i figured this would be a more appropriate place for this. I tried to delete the other but couldnt so sorry but anyway, Im kinda new to this site and the brute all together...Ive been looking around on here daily getting ideas...So...
  14. 2002 Kodiak Snorkel "How To"!

    Snorkeling & Jetting
    Ok I'm in the process of snorkeling the Kodiak right now... It's a pain, and there aren't many write-ups on it, and NO GOOD WRITE-UPS w/PICTURES. So I'm gonna try to do this... Hope this helps someone some day. **All PVC pipe, fittings, etc. are 1.5" pipe size.** I'm gonna start with the...
  15. Some Pics Of My 97 Polaris Snorkel Project

    Some Pics Of My 97 Polaris Snorkel Project

    My 1997 polaris sportsman 500, Project! Still in Progress... More pics to come.
  16. Some Pics Of My 97 Polaris Snorkel Project

    Some Pics Of My 97 Polaris Snorkel Project

    My 1997 polaris sportsman 500, Project! Still in Progress... More pics to come.
  17. Some Pics Of My 97 Polaris Snorkel Project

    Some Pics Of My 97 Polaris Snorkel Project

    My 1997 polaris sportsman 500, Project! Still in Progress... More pics to come.
  18. Some Pics Of My 97 Polaris Snorkel Project

    Some Pics Of My 97 Polaris Snorkel Project

    My 1997 polaris sportsman 500, Project! Still in Progress... More pics to come.
  19. Some Pics Of My 97 Polaris Snorkel Project

    Some Pics Of My 97 Polaris Snorkel Project

    My 1997 polaris sportsman 500, Project! Still in Progress... More pics to come.
  20. Some Pics Of My 97 Polaris Snorkel Project

    Some Pics Of My 97 Polaris Snorkel Project

    My 1997 polaris sportsman 500, Project! Still in Progress... More pics to come.
Top