Mud in My Blood Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
new to this forum thing as far as posting but have found a lot of very helpful info on this site. radiator relocate, mimb 3" center snorkel and oil cooler all awesome write ups. thanks. when i was installing my snorkels i wondered if i could find a inline fan to help pull hot air out of the cvt. after a little searching found a bilge blower fan on ebay that i installed on the exhaust side of cvt snorkel to pull hot out out. and it works like a charm. camera wasn't cooperating when i was doing install so no pics, know ima gonna catch a lot of flack over this but plastic is back on and not coming off i can help it sorry guys. but the cvt exhaust snorkel crosses over the right side of the bike to the left over the shock support just like in 3" snorkle write up and thats where i installed, over the shock support. as u can see in pics i screwed and siliconed 2" straight couplers inside ends of fan but had to change that to 2" elbows. its at the shop getting carbs rebuilt and will take pics when it gets back. with plastics on of course. to find the fan just do a saerch on ebay motors for "bilge blower" there are several choices. it is a small fan but moves more air than u think. dont get impatient on pics gonna be a few days.​
 

Attachments

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top