Mud in My Blood Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
i have a 07 750 brute and i am getting ready to snorkle it i am wondering if i am going to hav to re jet the bike when i do this. any help or info is appreciated. thanx
 

·
Premium Member
Joined
·
372 Posts
use the 3 inch elbow and you may not have to rejet.
 

·
Premium Member
Joined
·
189 Posts
Be prepared to rejet it - might as well do it right while ur doing it. And take a look at the thread thats titled "I redid my snorkels with 3" rubber elbow" or somehting like that - you'll see what he took off and what he replaced it with. If you go with the 2" like he did originally - you will catch crap trying to get ur jetting right - way too many bends and the air will not flow consistently - but with the 3" 90 cut down and routed the way he has it now - you'll have a better air flow.
Good luck - let us see it when ur done!

Redone my Intake Snorkel to 3" rubber elbow

thats the thread i was talking about
 

·
Registered
Joined
·
12 Posts
Discussion Starter #4
alrite guys thinks for the help if you hav any more input let me know
 
1 - 4 of 4 Posts
Top