[SparkyPrep]

I just got done pulling the AudioFormz roof off of my RZR, put down some weather stripping on my roll cage, and re-installed the roof. No more squeaking from the roof rubbing against the roll cage! While I was at it, I added some dielectric grease to all the electrical connections in the roof to prevent corrosion.

 

[Slydog]

I moved mine to where im going to swap the front diff out. Then took a ride to the keys

 

[Slydog]

Pulled my clutches off to fix my belt eating problem.
Got it jacked up and. Started tearing it down to pull front diff.
Just working late. It's hard to dedicate the hours needed to getrdone fast. Just picking away

 

[SparkyPrep]

Pulled my clutches off to fix my belt eating problem.
Got it jacked up and. Started tearing it down to pull front diff.
Just working late. It's hard to dedicate the hours needed to getrdone fast. Just picking away

I've got the same problem. Just not enough time. It took me 3 weeks, with my ride completely torn to pieces, to put the lift kit and portals on it.

 

[Slydog]

 

[Slydog]

60hr weeks right now are a killer in this heat.

 

[SparkyPrep]

Me too! Do you work at a power plant too?

 

[Slydog]

No. My job is not that glamorous🤫

 

[SparkyPrep]

Just spent 3 hours washing the RZR. That sucked.

 

[Slydog]

The least favorite part.
That black mud doesn't just hose off

 

[SparkyPrep]

Nope. Pressure washer, foam cannon, and hand scrubbing. Blow drying, then a coat of Armor-All to the whole thing.

 

[Slydog]

Absolutely pressure clean.
And any spots you miss on the hand wash show up

 

[SparkyPrep]

Did a oil change on my portals.

 

[Slydog]

Picked up a used secondary clutch in really good condition. Disassembled it to inspect. Measure the shims so i know what's in there and installed my red spring

 

[SuperATV]

Did a oil change on my portals.

 

[SparkyPrep]

Tyler, is it normal for there to be some very fine metal particles in the oil? Like, just giving the oil a silvery "sheen"?

 

[SuperATV]

Yep, just gear meshing. If you get chunks...you got problems...but the fine stuff is just from the gear meshing.

And this is still Erik, btw... Lol! I guess I need to change my signature here.

 

[SparkyPrep]

10/4. No chunks. Thanks!

 

[Slydog]

Stared tearing down drivers side. Axle bearing in diff is shot. Teeth on the clutch. In diff for drivers side axle are sheared off? It looks like. Diff had some water in it when i drained it..
Ate dinner drank a beer and got lazy so that's as far as i got 😁

I'm starting to believe the po was lazy
And little maintenance was done

 

[Slydog]

Also the drivers side axle looks pretty new.
But the little round snap ring on the end was broken when i pulled the axle out.
Any ideas where i can get some?