Mud in My Blood Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hey, been working on my ranva winch and have had some trouble getting it to work! I have 12v going onto the control box but only 3.6v coming out!!!
I was getting ticking sound when I started trying to get it to work, it was jammed and not free spinning, I have since unjammed it, but now nothing no tick no nothing!
Is there a way to fix this or do I need to replace the control box?
 

·
Registered
Joined
·
139 Posts
There is so much to electrical troubleshooting. Need a lot more info. Problems like these are hard for me to diagnose online.
 

·
Administrator
Joined
·
15,448 Posts
Try by passing the switch and putting the winch hot right to the battery and see if it moves w/ out any problem.

If so it's probably the switch or the solenoid. Solenoid's are bad about going out, especially if they've been submerged.
 
1 - 4 of 4 Posts
Top